Employment

What Do You Know About Professionals

6 Ways To Prevent Costly Heater Repair

If you want to make sure that your heating system will be able to last for long and perform at optimal condition all the time, there are some ways that you need to take into consideration to make it happen including:

Number 1. Regularly check the furnace filter every single month and change it if it is dirty. As you do this, it is going to help you save on utility bills and get better heating as well as air conditioning power at the same time.

Number 2. If it seems that the heater comes on and off for short periods of time or odd times, simply adjust your HVAC unit in order to determine why it might be turning off and on quickly or erratically. In some cases, what it need is just minor adjustments to the thermostat and it will run fine again. Also, you want to look at the humidifier on the furnace if it has burnt out solenoid water valve or clogged or perhaps, a bad drum motor which causes the unit to not work.
Lessons Learned About Services

Number 3. Another crucial thing you have to do is checking the burner flame of the heating system. You’ll have to turn on the power switch and then, activate the burners by increasing the temperature of your furnace. Say for example that the flames have a blue color, then you are doing just fine but if they’re yellow, then this may be a sign that the burners have to be cleaned.
5 Takeaways That I Learned About Services

Number 4. Make it a point that you remove the blower and give it a thorough cleaning by using a brush. Each blade has to be cleaned carefully while making sure that the counterweights are not disturbed. With regards to the hot surface igniter, be sure to avoid touching it. Instead, make use of a plastic straw and blow off the dirt that has accumulated in it. As a matter of fact, this approach will help you avoid getting burned while being able to prevent this fragile piece to be broken throughout the process.

Number 5. Look for the bearing especially if you have an old system. To be sure that it is always in good condition, you might need to add several drops of machine oil at least once a year.

Number 6. Say that your heating system works along with the AC unit, then it is going to be necessary to make adjustments. The dampers are oftentimes marked as to where the air is being directed. In addition to that, you can adjust it by directing the warm air where you like it.

Following these simple pointers can ensure that your heating system is in optimal condition.

Leave a Reply

Your email address will not be published. Required fields are marked *